nowadays, we live in a world which quality, speed, accuracy and cost are the most important parameters in parts' design and manufacturing. due to the complexity of part manufacturing, traditional and nontraditional manufacturing techniques are used. aerodynamic tests usually requires one or several models for testing in wind tunnels and these models typically have particular complexities in whi...

An experimental study was performed to investigate the effects of the body angle of attack on the tail surface pressure distribution for a half body-tail combination in subsonic flow. The results show, in small deflection angle regions, that the tail deflection has the same effect on the surface pressure as the body angle of attack. However at moderate to high deflections, the flowfiled caused ...

The blades of wind turbines are the most important parts in producing power output. In this study, a section of a 660 KW wind turbine blade will be installed in Iran in near future was tested in a wind tunnel. In addition to steady tests, various unsteady tests including the effects of reduced frequency, mean angle of attack, and amplitudes were carried out. The preliminary results show strong ...

The blades of wind turbines are the most important parts in producing power output. In this study, a section of a 660 KW wind turbine blade will be installed in Iran in near future was tested in a wind tunnel. In addition to steady tests, various unsteady tests including the effects of reduced frequency, mean angle of attack, and amplitudes were carried out. The preliminary results show strong ...

Simulation of an underwater glider to investigate the effect of angle of attack on the hydrodynamic coefficients such as lift, drag, and torque. Due to the vital role of these coefficients in designing the controllers of a glider and to obtain an accurate result, this simulation has been studied at a range of operating velocities. The total length of the underwater glider with two wings is 900 ...

In this study, the behavior of a subject consisting of a cylinder with 4 plates perpendicular to it with a rotational degree of freedom under airflow both through the numerical approach, known as improved discrete vortex and experimental approach were investigated. The experimental and numerical results have shown that oscillating regime occurs in low velocity and length. This movement is vibra...

An extensive experimental investigation to study the flow structure over the wing of a fighter type configuration model has been conducted. The model used for this study was similar to the High Alpha Research Vehicle (HARV) that has been used in various European research centers for studying its force and moment characteristics. Tests were conducted at two subsonic speeds and at low to moderate...

Details of pressure distributions, on a two dimensional airfoil oscillating in pitch through stall, in a 0.8 0.8 m low-speed wind tunnel are presented. Pitching occurred about the airfoils quarter-chord axis. Pitch rate, Reynolds number, and oscillation amplitudes were varied to determine the effects on pressure and lift distributions. It was found that mean angle of attack and pitching amplitu...